9840206704
| Quantity | Price |
|---|---|
| 1 - 1 | Rs 149.00 |
| 2 - 2 | Rs 80.00 |
| 3 - 3 | Rs 66.33 |
TECNO SCREEN PROTECTOR SKIN
7 DAY'S REPLACEMENT WARRANTY
- NO PHYSICAL DAMAGE
FOR MORE DETAILS YOU CAN CONTACT ON
WHATSAPP - 9840206704
Installing a screen protector on your TECNO phone can be a meticulous process, but with patience and the right steps, you can achieve a bubble-free, perfect application. Here’s a step-by-step guide to help you through the installation:
### Materials Needed:
1. TECNO screen protector skin
2. Microfiber cloth
3. Cleaning wipes (usually included with the screen protector)
4. Dust removal sticker (usually included with the screen protector)
5. Applicator card (usually included with the screen protector)
6. Spray solution (if using a wet application protector)
### Step-by-Step Installation:
#### 1. Preparation:
- **Clean Your Workspace:** Make sure you are in a dust-free environment. A steamy bathroom can help reduce airborne dust.
- **Wash Your Hands:** This helps avoid transferring oils or dirt onto the screen.
#### 2. Cleaning the Screen:
- **Use the Cleaning Wipes:** Wipe down the phone screen thoroughly with the provided cleaning wipes.
- **Dry with Microfiber Cloth:** Use the microfiber cloth to dry the screen completely.
- **Remove Dust:** Use the dust removal sticker to pick up any remaining dust particles. Even tiny specks can cause bubbles.
#### 3. Aligning the Protector:
- **Dry Application (most common for plastic and tempered glass protectors):**
- **Peel Back the Protective Layer:** Carefully peel back a small portion of the protective layer from the screen protector.
- **Align the Protector:** Align the screen protector with the edges of your phone screen. Make sure the cutouts for the camera, speakers, and buttons are in the correct positions.
- **Apply the Protector:** Begin applying the protector by aligning it with the screen. Slowly peel off the backing as you press the protector onto the screen. Use the applicator card to smooth it out and remove bubbles.
- **Wet Application (common for TPU and hydrogel protectors):**
- **Spray Solution:** Lightly spray the adhesive side of the screen protector with the provided solution.
- **Apply the Protector:** Carefully align and place the protector on the screen. The solution allows you to slide the protector into the perfect position.
- **Squeegee Out Bubbles:** Use the applicator card to gently push out excess solution and bubbles from the center towards the edges. Wipe off any excess liquid.
#### 4. Finishing Touches:
- **Check for Bubbles:** Use the applicator card to smooth out any remaining bubbles. Small bubbles usually disappear within 24-48 hours.
- **Let it Settle:** If you used a wet application, let your phone sit for a few hours (or as instructed) to allow the protector to adhere fully.
### Tips for Success:
- **Patience is Key:** Take your time to ensure the screen is clean and the protector is aligned correctly.
- **Avoid Dust:** Ensure no dust settles on the screen during the application. A dust-free environment is crucial.
- **Use the Right Tools:** Utilize the tools provided with the screen protector kit for the best results.
By following these steps, you can achieve a smooth, bubble-free installation of your TECNO screen protector skin.
