9840206704
| Quantity | Price |
|---|---|
| 1 - 1 | Rs 149.00 |
| 2 - 2 | Rs 80.00 |
| 3 - 3 | Rs 66.34 |
MOTO SCREEN PROTECTOR SKIN
7 DAY'S REPLACEMENT WARRANTY
- NO PHYSICAL DAMAGE
FOR MORE DETAILS YOU CAN CONTACT ON
WHATSAPP - 9840206704
Installing a screen protector or skin on your MOTO device can be a bit tricky, but with careful preparation and attention to detail, you can achieve a bubble-free and well-aligned installation. Here’s a step-by-step guide:
### Materials Needed:
- Screen protector or skin
- Cleaning cloth (usually provided with the screen protector)
- Dust removal stickers (usually provided)
- Alignment tool (if provided)
- Squeegee (if provided)
- Spray solution (for some skins)
- A well-lit, dust-free environment
### Step-by-Step Installation Guide:
#### 1. **Preparation:**
- Wash your hands thoroughly to remove any oils or dirt.
- Clean the workspace to minimize dust.
#### 2. **Clean the Screen:**
- Turn off your MOTO device.
- Use the provided cleaning cloth to wipe the screen, ensuring it’s free of fingerprints, dust, and smudges.
- Use the dust removal stickers to pick up any remaining dust particles.
#### 3. **Align the Screen Protector:**
- If the screen protector comes with an alignment tool, use it to help position the protector correctly.
- Without removing the adhesive backing, place the screen protector over the screen to check the fit and alignment. Ensure it aligns perfectly with the edges and cutouts.
#### 4. **Apply the Screen Protector:**
- Carefully peel off the adhesive backing from one end of the screen protector.
- Align the exposed end with the top or bottom of the screen.
- Slowly lower the screen protector onto the screen, using a squeegee to smooth out bubbles as you go.
- Continue peeling the backing and smoothing out bubbles until the entire protector is applied.
#### 5. **Remove Bubbles:**
- Use the squeegee or a soft cloth to push any remaining bubbles toward the edges.
- For stubborn bubbles, gently lift the edge nearest to the bubble and reapply.
#### 6. **Final Adjustments:**
- Check for any misalignments or bubbles that need further smoothing.
- If needed, you can carefully lift and reapply the protector to fix alignment issues.
### Additional Tips:
- **Avoid Dust:** Install the screen protector in a bathroom or kitchen after running a hot shower to minimize dust.
- **Patience:** Take your time during the alignment and application steps to avoid mistakes.
- **Reapply:** If the first attempt isn’t perfect, you can usually lift and reapply the protector a few times without losing adhesive quality.
### Skin Installation:
If you are installing a full-body skin, follow similar steps but with the additional step of applying a spray solution (if provided) to the back of the skin to help with repositioning.
1. **Clean the Device:** Ensure the device is free from dust and oil.
2. **Spray Solution:** Lightly spray the adhesive side of the skin if instructed.
3. **Align and Apply:** Carefully align the skin with the device edges and apply it.
4. **Smooth Out:** Use a squeegee to smooth out bubbles and excess solution.
5. **Allow to Dry:** Let the skin dry and set for several hours before using the device.
Following these steps carefully will help you achieve a clean, bubble-free installation of your MOTO screen protector or skin.
